WAEC Syllabus for Auto Electrical Work 2022/2023

The WAEC syllabus for Auto Electrical Work is the topic you must study to sit for the examination. It contains the aims and objectives, notes and format for the Auto Electrical Work exam.

Studying the Auto Electrical Work syllabus is necessary for your exam preparation. It will serve as a guide for you to know the topics to read. There are also notes on concepts you should pay attention to learning.

Exam preparations without using the Auto Electrical Work syllabus are like going to the farm without your agricultural tools. You will end up not being productive.

Ensure you begin your exam preparations using the syllabus.

This post contains the Auto Electrical Work syllabus and recommended textbooks of the West African Examination Council (WAEC).

Let me know in the comment section if you have any questions. I will love to hear from you.

WAEC Auto Electrical Work

This examination syllabus has evolved from the Senior Secondary School Trade Curriculum. The examination syllabus does not replace the curriculum.

The syllabus has been arranged to subsume six themes: battery, starting, ignition, charging, lighting and auxiliary systems.

Objective

The objective of the syllabus is to test candidates’ knowledge, skills and attitude in the field of Auto Electrical Works. Specifically, candidates are to:

  • understand the concepts in auto electrical works;
  • use tools and equipment to carry out maintenance and repair on motor vehicles;
  • understand the safety practices and observe them in the work environment.

Examination Scheme

There will be three papers, Papers 1, 2 and 3, all of which are to be taken. Papers 1 and 2 shall be a composite paper to be taken at one sitting.

PAPER 1: Will consist of forty multiple-choice objective questions all of which are to be answered in 45 minutes for 40 marks.                           

PAPER 2: Will consist of six short-structured questions. Candidates will be required   to answer any four in 1 hour for 60 marks.

PAPER 3: It will be a practical test of 2 hours duration. It will consist of three skill-based questions out of which candidates will answer two for 90 marks.                    

A list of materials for the test shall be made available to schools not less than two weeks before the paper is taken for materials procurement and relevant preparations.

Alternative to Practical

Alternatively, in the event that materials for the actual practical test cannot be acquired, the Council may consider testing theoretically, candidates’ level of acquisition of the practical skills prescribed in the syllabus.

For this alternative test, there will be two compulsory essay questions to be answered in 2 hours for 100 marks.

Industrial Attachment

This should be done by the candidates during the long vacation between their SS II and SS III course.

It will be supervised and assessed by their subject teachers. It will carry 10 marks.

WAEC Auto Electrical Work Syllabus

Battery

  1. Concept of  battery
  2. Uses of battery
  3. Types, Constructional details and ratings
  4. Charging
  5. Testing and Maintenance

Starting System

  1. Purpose and components of the starting system
  2. Circuit diagram
  3. Types of the starter motor
  4. Repair of starter motors

Ignition System

  1. Purpose and components of the ignition system
  2. Circuit diagram
  3. Construction and operation of the ignition coil
  4. Types of Ignition System
  5. Timing
  6. Faults and repairs

Charging System

  1. Purpose and components of the charging system
  2. Alternator
  3. Circuit diagram
  4. Faults and repairs

Lighting System

  1. Purpose and classification of lighting in a motor vehicle
  2. Headlamps
  3. Circuit diagram
  4. Maintenance and repairs

Auxiliary System

  1. Concept and components of auxiliary system
  2. Constructional details and operation of auxiliary system component
  3. Maintenance and repairs of auxiliary Components

Materials/Equipment

Here is the list of facilities and major equipment/materials required;

  1. Motor batteries
  2. Battery head  moulder set
  3. A complete toolbox
  4. Polythene hand gloves sets
  5. Ammeter, voltmeter, multimeter
  6. High rate discharge tester
  7. Spanners, hand drilling machine
  8. Vice
  9. Bench/Table
  10. Wire brush, bearing extractor, pulley extractor
  11. Feeler gauge, soldering iron and lead
  12. Emery cloth, wooden file, aprons
  13. Jumper cable, magnetic pick-up
  14. Googles, plastic trays
  15. Hydrometer
  16. Tester (Screwdriver type)
  17. Battery charger, testing lamp, cable stripper, insulation tape
Share on:

I am an Enthusiastic SEO Writer engineering helpful skyscraping content on the internet. A lifelong learner who loves to read, learn and write.

Leave a Comment